Trims
SIMPLE INSTRUCTIONS
1.Cut circle of fabric using pattern. Place button in centre.
2.Stretch fabric tightly over button with fingers and hook on to the teeth inside button until teeth show through.
3.Position back so that you can read 'TRIMS' Snap on back plate with finger pressure - and there's a finished button no tailor could better.
TRIMS ARE RE-USABLE
Difficult Materials
May be wetted thoroughly and applied wet. A safety pin may be used to push material into teeth. Run basting stitch round edge of circle - place button in centre and pull up thread evenly.
Sheer Materials
Two thicknesses are suggested. Use a plain piece underneath cut the same size as the button.
To re-cover
Ease off back plate with the point of a large safety pin. Remove fabric and make yourself a new button. TRIMS can be used over and over again.
Cannot rust - Dry Cleanable - Washable
Have you tried TRIMS Cover - your - own - Buckles
PATENTED
Sole UK Manufacturers
NEWEY GOODMAN LTD.,BIRMINGHAM, ENGLAND
1.Cut circle of fabric using pattern. Place button in centre.
2.Stretch fabric tightly over button with fingers and hook on to the teeth inside button until teeth show through.
3.Position back so that you can read 'TRIMS' Snap on back plate with finger pressure - and there's a finished button no tailor could better.
TRIMS ARE RE-USABLE
Difficult Materials
May be wetted thoroughly and applied wet. A safety pin may be used to push material into teeth. Run basting stitch round edge of circle - place button in centre and pull up thread evenly.
Sheer Materials
Two thicknesses are suggested. Use a plain piece underneath cut the same size as the button.
To re-cover
Ease off back plate with the point of a large safety pin. Remove fabric and make yourself a new button. TRIMS can be used over and over again.
Cannot rust - Dry Cleanable - Washable
Have you tried TRIMS Cover - your - own - Buckles
PATENTED
Sole UK Manufacturers
NEWEY GOODMAN LTD.,BIRMINGHAM, ENGLAND
0 Comments:
Post a Comment
<< Home